Yangzhou Jiangdu Chenguang Special Equipment Factory

Silicone Baking Mat manufacturers / suppliers, offering Silicone Baking Mat, Silicone Pastry Mat, Coated Fiberglass Fabric, Aluminum Foil Tape, Fiberglass Coating Machine, Geosynthetics Products and so on.

About Us

  • 1
  • 2
  • 3
  • 4
  • 5
Yangzhou Jiangdu Chenguang Special Equipment FactoryYangzhou Jiangdu Chenguang Special Equipment FactoryYangzhou Jiangdu Chenguang Special Equipment FactoryYangzhou Jiangdu Chenguang Special Equipment FactoryYangzhou Jiangdu Chenguang Special Equipment Factory
Yangzhou Jiangdu Chenguang Special Equipment Factory
Address: 15 Nanling Rd., Yiling Town, Jiangdu, Yangzhou, Jiangsu, China
Member Since: 2018
Main Markets: Africa , Americas , Asia , Caribbean , East Europe , Europe , Middle East , North Europe , Oceania , Other Markets , West Europe , Worldwide

Contact Us

Mobile:
Tel:
Fax:
Wechat: 13853818677

Mr. James Liu

Skype:

Contact Us
Recommended Products
New Products
Fiberglass Drywall Joint Tape

Certificate: ISO9001, SGS, CE

Product Description: Fiberglass drywall joint tape  has superior quality and is the ideal material for drywall,ceiling and gypsum. Drywall joint tape  is used woven fiberglass mesh as base material, after coated with acrylic acid copolymer liquid then clean cut into different width and length tape. The chemical stability and no oxygenated property of fiberglass make the tapes have superiority that other materials can not be compared with. Drywall Joint Fiberglass Tape has good performances, like good softness, high stickiness, easy application. Drywall Joint Fiberglass Mesh Tape gives you the best solution for the wall problems like wall crakes, plasterboard joints, wall holes etc, and it is the ideal material for drywall and ceiling problems. Certificate: ISO9001, SGS, CE. Technical Data Specification Mass Density Tensile Strength (N/5cm) Adhesion Weaving Structure g/m2 counts/inch Warp Weft (Second) 55g-3.2*3.2mm 55 8*8 500 500 >900 Leno 60g-3.2*3.2mm 60 8*8 550 500 >900 Leno 65g-2.8*2.8mm 65 9*9 550 550 >900 Leno 75g-2.8*2.8mm 75 9*9 600 600 >900 Leno 85g-2*2mm 85 12*12 650 650 >900 Leno 75g-1.25*2.5mm 75 20*10 700 700 >900 Plain Package: 1. Each roll per shrinkage bag, then 4, 6, 8, 12, 24, 36, 54, 72 or 96 rolls per carton.                  2. Plastic bag, then in carton                  3. Pallets can be offered upon request. Application: How to use Fiberglass Drywall Joint Tape? Instructions for Taping Drywall (Sheetrock) Joints 1. Clean surface of dust and dirt. Position tape over seam and cut to exact length. 2. When seaming drywall/wallboard joints, use only quick setting joint compound. For best results maintain room temperature between 50° - 70°F. 3. Apply joint compound working it through the mesh. Let dry to manufacturer's instructions and sand smooth. 4. Apply a second, thinner coat wider than the first feathering edges outward. Let dry and sand smooth. Instructions for Repairing Cracks 1. Slightly open up crack to a width of 1/8" and fill with ready mix or any setting compound. Let dry to manufacturer's instructions. 2. Clean and sand surface. Apply joint tape to the repair area; overlapping the end of each crack by 1" or more. 3. Spread compound down the crack, working it through the mesh. let dry and sand smooth. 4. For a finished appearance apply a second, thinner coat wider than the first. Let dry and sand smooth. Instructions for Patching Holes 1. Clean and sand surface. 2. Cut two pieces of joint tape 2" longer than the hole dimensions. Apply tape over the hole in a criss-cross manner so entire opening is covered by both layers. 3. Depress joint tape 1/4" into hole and fill with ready mix or any setting compound. Let dry to manufacturer's instructions and sand smooth. 4. For a finished appearance apply a second, thinner coat wider than the first. Let dry and sand smooth. Founded in 1996's, Chenguang specialized in fiberglass related machine and products for more than 22 years. We have rich experience in manufacture all kinds of coating machines for fiberglass mesh, self-adhesive joint tape, fiberglass fabric and fiberglass geogrid. In 2010's, we started to produce silicone baking mat & silicone pastry mat and have abtained 4 national patents from the government. All the machines are designed and made by ourselves, which allow us to keep high quality level at competitive price. At present, our mats have been exported to more than 30 countries and are best sellers on Amazon, Aldi, Bed Bath & Beyond, Ebay, QVC, Walmart, Kroger, Costco etc. You`re welcome to visit us for further business negotiation and cooperation!   FAQ Are you factory or trading company? Where are you located? We are both factory and trading company. Our factory is located in Jiangdu, Yangzhou city, Jiangsu province.   What're your main products? Our main products are silicone baking mat, silicone pastry mat, aluminum baking pan, fiberglass related machine including creel, rapier weaving machine, coating machine and production line for fiberglass mesh, self-adhesive joint tape and fiberglass fabric. Special equipment can be available as per your requirement. We have 22 years of experience and have served more than 500 business partners throughout out the world.   What's your advantage? 22 years of manufacturing experience and well trained technicians. Now more than 200 coating machines are running in domestic and abroad.   What's your sample policy? General speaking, we offer small sample free of charge. However,the freight rate should be collect.You may offer us your collect account number such as DHL,UPS,TNT,FEDEX or just send us freight rate to our Paypal account.For large sample,we will charge both sample cost and freight rate.

Fiberglass Self-adhesive Joint Tape

Certificate: ISO9001, SGS, CE

Product Description: Fiberglass self-adhesive joint tape is characterized of  excellent alkali resistance, high tensile strength and deformation-resistance, perfect chemical stability, wonderful self-adhesive and good position properly. Fiberglass self-adhesive mesh tape very easy to be applied and widely used to repair drywall, join plaster boards and repair cracks and other damage in wall surface. Self-adhesive fiberglass joint tape is an ideal and necessary material for inside wall repairing and decoration of modern buildings. Unit weight is from 40g/m2 to 300g/m2. Certificate: ISO9001, SGS, CE. Technical Data Specification Mass Density Tensile Strength (N/5cm) Adhesion Weaving Structure g/m2 counts/inch Warp Weft (Second) 55g-3.2*3.2mm 55 8*8 500 500 >900 Leno 60g-3.2*3.2mm 60 8*8 550 500 >900 Leno 65g-2.8*2.8mm 65 9*9 550 550 >900 Leno 75g-2.8*2.8mm 75 9*9 600 600 >900 Leno 85g-2*2mm 85 12*12 650 650 >900 Leno 75g-1.25*2.5mm 75 20*10 700 700 >900 Plain Package: 1. Each roll per shrinkage bag, then 4, 6, 8, 12, 24, 36, 54, 72 or 96 rolls per carton.                  2. Plastic bag, then in carton                  3. Pallets can be offered upon request. Application: How to use Fiberglass Self-adhesive Joint Tape? Instructions for Taping Drywall (Fibtex) Joints 1. Clean surface of dust and dirt. Position tape over seam and cut to exact length. 2. When seaming drywall/wallboard joints, use only quick setting joint compound. For best results maintain room temperature between 50° - 70°F. 3. Apply joint compound working it through the mesh. Let dry to manufacturer's instructions and sand smooth. 4. Apply a second, thinner coat wider than the first feathering edges outward. Let dry and sand smooth. Instructions for Repairing Cracks 1. Slightly open up crack to a width of 1/8" and fill with ready mix or any setting compound. Let dry to manufacturer's instructions. 2. Clean and sand surface. Apply joint tape to the repair area; overlapping the end of each crack by 1" or more. 3. Spread compound down the crack, working it through the mesh. let dry and sand smooth. 4. For a finished appearance apply a second, thinner coat wider than the first. Let dry and sand smooth. Instructions for Patching Holes 1. Clean and sand surface. 2. Cut two pieces of joint tape 2" longer than the hole dimensions. Apply tape over the hole in a criss-cross manner so entire opening is covered by both layers. 3. Depress joint tape 1/4" into hole and fill with ready mix or any setting compound. Let dry to manufacturer's instructions and sand smooth. 4. For a finished appearance apply a second, thinner coat wider than the first. Let dry and sand smooth. Founded in 1996's, Chenguang specialized in fiberglass related machine and products for more than 22 years. We have rich experience in manufacture all kinds of coating machines for fiberglass mesh, self-adhesive joint tape, fiberglass fabric and fiberglass geogrid. In 2010's, we started to produce silicone baking mat & silicone pastry mat and have abtained 4 national patents from the government. All the machines are designed and made by ourselves, which allow us to keep high quality level at competitive price. At present, our mats have been exported to more than 30 countries and are best sellers on Amazon, Aldi, Bed Bath & Beyond, Ebay, QVC, Walmart, Kroger, Costco etc. You`re welcome to visit us for further business negotiation and cooperation!   FAQ Are you factory or trading company? Where are you located? We are both factory and trading company. Our factory is located in Jiangdu, Yangzhou city, Jiangsu province.   What're your main products? Our main products are silicone baking mat, silicone pastry mat, aluminum baking pan, fiberglass related machine including creel, rapier weaving machine, coating machine and production line for fiberglass mesh, self-adhesive joint tape and fiberglass fabric. Special equipment can be available as per your requirement. We have 22 years of experience and have served more than 500 business partners throughout out the world.   What's your advantage? 22 years of manufacturing experience and well trained technicians. Now more than 200 coating machines are running in domestic and abroad.   What's your sample policy? General speaking, we offer small sample free of charge. However,the freight rate should be collect.You may offer us your collect account number such as DHL,UPS,TNT,FEDEX or just send us freight rate to our Paypal account.For large sample,we will charge both sample cost and freight rate.

Fiberglass Self Adhesive Joint Tapes

Certificate: ISO9001, SGS, CE

Product Description: Fiberglass self adhesive joint tapes are made of woven fiberglass alkali-resistant fabric mesh coated with adhesive acrylic compound and high pressure sensative glue, then cut fabric into tapes and pack. Fiberglass self adhesive mesh tape is widely used for repairing cracks and joints of drywall, plaster board and other wall surface. Self adhesive fiberglass joint tape has good performance of alkaline-resistance, high tensile strength and deformation-resistance, excellent self-adhesive performance and simple and easy application. Certificate: ISO9001, SGS, CE. Technical Data of Fiberglass Self Adhesive Joint Tapes Specification Mass Density Tensile Strength (N/5cm) Adhesion Weaving Structure g/m2 counts/inch Warp Weft (Second) 55g-3.2*3.2mm 55 8*8 500 500 >900 Leno 60g-3.2*3.2mm 60 8*8 550 500 >900 Leno 65g-2.8*2.8mm 65 9*9 550 550 >900 Leno 75g-2.8*2.8mm 75 9*9 600 600 >900 Leno 85g-2*2mm 85 12*12 650 650 >900 Leno 75g-1.25*2.5mm 75 20*10 700 700 >900 Plain Package: 1. Each roll per shrinkage bag, then 4, 6, 8, 12, 24, 36, 54, 72 or 96 rolls per carton.                  2. Plastic bag, then in carton                  3. Pallets can be offered upon request. Application: How to use Fiberglass Self Adhesive joint tapes? Instructions for Taping Drywall (Fibtex) Joints 1. Clean surface of dust and dirt. Position tape over seam and cut to exact length. 2. When seaming drywall/wallboard joints, use only quick setting joint compound. For best results maintain room temperature between 50° - 70°F. 3. Apply joint compound working it through the mesh. Let dry to manufacturer's instructions and sand smooth. 4. Apply a second, thinner coat wider than the first feathering edges outward. Let dry and sand smooth. Instructions for Repairing Cracks 1. Slightly open up crack to a width of 1/8" and fill with ready mix or any setting compound. Let dry to manufacturer's instructions. 2. Clean and sand surface. Apply joint tape to the repair area; overlapping the end of each crack by 1" or more. 3. Spread compound down the crack, working it through the mesh. let dry and sand smooth. 4. For a finished appearance apply a second, thinner coat wider than the first. Let dry and sand smooth. Instructions for Patching Holes 1. Clean and sand surface. 2. Cut two pieces of joint tape 2" longer than the hole dimensions. Apply tape over the hole in a criss-cross manner so entire opening is covered by both layers. 3. Depress joint tape 1/4" into hole and fill with ready mix or any setting compound. Let dry to manufacturer's instructions and sand smooth. 4. For a finished appearance apply a second, thinner coat wider than the first. Let dry and sand smooth.   Founded in 1996's, Chenguang specialized in fiberglass related machine and products for more than 22 years. We have rich experience in manufacture all kinds of coating machines for fiberglass mesh, self-adhesive joint tape, fiberglass fabric and fiberglass geogrid. In 2010's, we started to produce silicone baking mat & silicone pastry mat and have abtained 4 national patents from the government. All the machines are designed and made by ourselves, which allow us to keep high quality level at competitive price. At present, our mats have been exported to more than 30 countries and are best sellers on Amazon, Aldi, Bed Bath & Beyond, Ebay, QVC, Walmart, Kroger, Costco etc. You`re welcome to visit us for further business negotiation and cooperation!   FAQ Are you factory or trading company? Where are you located? We are both factory and trading company. Our factory is located in Jiangdu, Yangzhou city, Jiangsu province.   What're your main products? Our main products are silicone baking mat, silicone pastry mat, aluminum baking pan, fiberglass related machine including creel, rapier weaving machine, coating machine and production line for fiberglass mesh, self-adhesive joint tape and fiberglass fabric. Special equipment can be available as per your requirement. We have 22 years of experience and have served more than 500 business partners throughout out the world.   What's your advantage? 22 years of manufacturing experience and well trained technicians. Now more than 200 coating machines are running in domestic and abroad.   What's your sample policy? General speaking, we offer small sample free of charge. However,the freight rate should be collect.You may offer us your collect account number such as DHL,UPS,TNT,FEDEX or just send us freight rate to our Paypal account.For large sample,we will charge both sample cost and freight rate.

Self-adhesive Fiberglass Drywall Joint Tape

Certificate: ISO9001, SGS, CE

Product Description: Self-adhesive fiberglass drywall joint tape is used fiberglass woven mesh as base material, then coated with acrylic acid polymer as base coating and high pressure sensative glue. The jumbo rolls will be cutted into small narrow width and roll length as per specific requirement. Self adhesive fiberglass drywall joint tape is used for wall renovation, decoration, wall cracks, holes and drywall. Self-adhesive fiberglass drywall mesh tape Can also be glued gypsum board, cement and other building materials to completely prevent the cracks in the walls and corners. Certificate: ISO9001, SGS, CE. Technical Data of Self-Adhesive Fiberglass Drywall Joint Tape Specification Mass Density Tensile Strength (N/5cm) Adhesion Weaving Structure g/m2 counts/inch Warp Weft (Second) 55g-3.2*3.2mm 55 8*8 500 500 >900 Leno 60g-3.2*3.2mm 60 8*8 550 500 >900 Leno 65g-2.8*2.8mm 65 9*9 550 550 >900 Leno 75g-2.8*2.8mm 75 9*9 600 600 >900 Leno 85g-2*2mm 85 12*12 650 650 >900 Leno 75g-1.25*2.5mm 75 20*10 700 700 >900 Plain Package: 1. Each roll per shrinkage bag, then 4, 6, 8, 12, 24, 36, 54, 72 or 96 rolls per carton.                  2. Plastic bag, then in carton                  3. Pallets can be offered upon request. Application: How to use Self-adhesive fiberglass drywall joint tape? Instructions for Taping Drywall (Fibtex) Joints 1. Clean surface of dust and dirt. Position tape over seam and cut to exact length. 2. When seaming drywall/wallboard joints, use only quick setting joint compound. For best results maintain room temperature between 50° - 70°F. 3. Apply joint compound working it through the mesh. Let dry to manufacturer's instructions and sand smooth. 4. Apply a second, thinner coat wider than the first feathering edges outward. Let dry and sand smooth. Instructions for Repairing Cracks 1. Slightly open up crack to a width of 1/8" and fill with ready mix or any setting compound. Let dry to manufacturer's instructions. 2. Clean and sand surface. Apply joint tape to the repair area; overlapping the end of each crack by 1" or more. 3. Spread compound down the crack, working it through the mesh. let dry and sand smooth. 4. For a finished appearance apply a second, thinner coat wider than the first. Let dry and sand smooth. Instructions for Patching Holes 1. Clean and sand surface. 2. Cut two pieces of joint tape 2" longer than the hole dimensions. Apply tape over the hole in a criss-cross manner so entire opening is covered by both layers. 3. Depress joint tape 1/4" into hole and fill with ready mix or any setting compound. Let dry to manufacturer's instructions and sand smooth. 4. For a finished appearance apply a second, thinner coat wider than the first. Let dry and sand smooth. Founded in 1996's, Chenguang specialized in fiberglass related machine and products for more than 22 years. We have rich experience in manufacture all kinds of coating machines for fiberglass mesh, self-adhesive joint tape, fiberglass fabric and fiberglass geogrid. In 2010's, we started to produce silicone baking mat & silicone pastry mat and have abtained 4 national patents from the government. All the machines are designed and made by ourselves, which allow us to keep high quality level at competitive price. At present, our mats have been exported to more than 30 countries and are best sellers on Amazon, Aldi, Bed Bath & Beyond, Ebay, QVC, Walmart, Kroger, Costco etc. You`re welcome to visit us for further business negotiation and cooperation!   FAQ Are you factory or trading company? Where are you located? We are both factory and trading company. Our factory is located in Jiangdu, Yangzhou city, Jiangsu province.   What're your main products? Our main products are silicone baking mat, silicone pastry mat, aluminum baking pan, fiberglass related machine including creel, rapier weaving machine, coating machine and production line for fiberglass mesh, self-adhesive joint tape and fiberglass fabric. Special equipment can be available as per your requirement. We have 22 years of experience and have served more than 500 business partners throughout out the world.   What's your advantage? 22 years of manufacturing experience and well trained technicians. Now more than 200 coating machines are running in domestic and abroad.   What's your sample policy? General speaking, we offer small sample free of charge. However,the freight rate should be collect.You may offer us your collect account number such as DHL,UPS,TNT,FEDEX or just send us freight rate to our Paypal account.For large sample,we will charge both sample cost and freight rate.

Drywall Fiberglass Joint Tape

Certificate: ISO9001, SGS, CE

Product Description: Drywall fiberglass joint tape is made of high quality C-glass fiber yarn, which has high performance of alkali resistance, flexibility and high tensile strength due to the chemical stability of fiberglass. Drywall fiberglass mesh tape is an ideal material for wall sealing and ceiling cracking. Drywall mesh tape is used in inner and outer wall insulation, water proof and wall strengthen. It is widely used to repair dry wall, gypsum board joints, wall cracks and other wall damage. Drywall fibreglass joint tape is very easy to install. Certificate: ISO9001, SGS, CE. Technical Data of Drywall Fiberglass Mesh Tape Specification Mass Density Tensile Strength (N/5cm) Adhesion Weaving Structure g/m2 counts/inch Warp Weft (Second) 55g-3.2*3.2mm 55 8*8 500 500 >900 Leno 60g-3.2*3.2mm 60 8*8 550 500 >900 Leno 65g-2.8*2.8mm 65 9*9 550 550 >900 Leno 75g-2.8*2.8mm 75 9*9 600 600 >900 Leno 85g-2*2mm 85 12*12 650 650 >900 Leno 75g-1.25*2.5mm 75 20*10 700 700 >900 Plain Package: 1. Each roll per shrinkage bag, then 4, 6, 8, 12, 24, 36, 54, 72 or 96 rolls per carton.                  2. Plastic bag, then in carton                  3. Pallets can be offered upon request. Application: How to use Drywall  Fiberglass Joint Tape? Instructions for Taping Drywall (Fibtex) Joints 1. Clean surface of dust and dirt. Position tape over seam and cut to exact length. 2. When seaming drywall/wallboard joints, use only quick setting joint compound. For best results maintain room temperature between 50° - 70°F. 3. Apply joint compound working it through the mesh. Let dry to manufacturer's instructions and sand smooth. 4. Apply a second, thinner coat wider than the first feathering edges outward. Let dry and sand smooth. Instructions for Repairing Cracks 1. Slightly open up crack to a width of 1/8" and fill with ready mix or any setting compound. Let dry to manufacturer's instructions. 2. Clean and sand surface. Apply joint tape to the repair area; overlapping the end of each crack by 1" or more. 3. Spread compound down the crack, working it through the mesh. let dry and sand smooth. 4. For a finished appearance apply a second, thinner coat wider than the first. Let dry and sand smooth. Instructions for Patching Holes 1. Clean and sand surface. 2. Cut two pieces of joint tape 2" longer than the hole dimensions. Apply tape over the hole in a criss-cross manner so entire opening is covered by both layers. 3. Depress joint tape 1/4" into hole and fill with ready mix or any setting compound. Let dry to manufacturer's instructions and sand smooth. 4. For a finished appearance apply a second, thinner coat wider than the first. Let dry and sand smooth.  Founded in 1996's, Chenguang specialized in fiberglass related machine and products for more than 22 years. We have rich experience in manufacture all kinds of coating machines for fiberglass mesh, self-adhesive joint tape, fiberglass fabric and fiberglass geogrid. In 2010's, we started to produce silicone baking mat & silicone pastry mat and have abtained 4 national patents from the government. All the machines are designed and made by ourselves, which allow us to keep high quality level at competitive price. At present, our mats have been exported to more than 30 countries and are best sellers on Amazon, Aldi, Bed Bath & Beyond, Ebay, QVC, Walmart, Kroger, Costco etc. You`re welcome to visit us for further business negotiation and cooperation!   FAQ Are you factory or trading company? Where are you located? We are both factory and trading company. Our factory is located in Jiangdu, Yangzhou city, Jiangsu province.   What're your main products? Our main products are silicone baking mat, silicone pastry mat, aluminum baking pan, fiberglass related machine including creel, rapier weaving machine, coating machine and production line for fiberglass mesh, self-adhesive joint tape and fiberglass fabric. Special equipment can be available as per your requirement. We have 22 years of experience and have served more than 500 business partners throughout out the world.   What's your advantage? 22 years of manufacturing experience and well trained technicians. Now more than 200 coating machines are running in domestic and abroad.   What's your sample policy? General speaking, we offer small sample free of charge. However,the freight rate should be collect.You may offer us your collect account number such as DHL,UPS,TNT,FEDEX or just send us freight rate to our Paypal account.For large sample,we will charge both sample cost and freight rate.

Soil stabilization Polyester Geogrid

Certificate: ISO9001, CE, ITB

Product Description: Soil stabilization Polyester Geogrid possess high tensile strengths in nature. Soil Stabilization Grid is frequently used as the reinforcement in unpaved/paved road constructions, slopes of waste landfill liner system, embankments and slopes, segmental retaining walls, and so on. Soil Stabilization Geogrids is made with a high tenacity polyester filament, which were manufactured by a weaving and knitting pro-cesses. The transverse ribs (weft) are interlaced and inserted into longitudinal ribs (warp) by a weaving mechanism. The longitudinal ribs were then knitted to create stable junctions. This type of geog-rid may be called a weft insertion warp knitting type. After fabrication, Soil Stabilization Geogrid was coated with PVC resin with additives. Certificate: ISO9002, CE, ITB Features and Benefits High tensile force at low elongation High ultimate tensile strength Excellent long-term behaviour due to low creep characteristics High resistance to soil micro-organisms and chemicals, UV radiation and mechanical damage Good grid/soil interaction provided by selecting the geogrid mesh to accommodate the adjacent material Problem-free installation due to low product weight and excellent flexibility even in extreme cold Very wide range of tensile strengths in length and width Applications Load-bearing layers in road, railway and airport construction Access roads and transportation routes Retaining walls and extra-steep earthwork slopes Slope stabilisation Noise reduction barriers Reclamation of industrial wasteland Earth embankments over piles Landfill Bridging of underground voids or sinkholes Technical Data Type Item No. Tensile Strength (kN/m) Elongation Mesh Size Width MD CD (%) (mm*mm) (m) Polyester Uniaxial Geogrid PET5030 30 30 13 12-50 1-6 PET6030 60 30 13 12-50 1-6 PET8030 80 30 13 12-50 1-6 PET10030 100 30 13 12-50 1-6 PET11030 110 30 13 12-50 1-6 PET120/30 120 30 13 12-50 1-6 PET15030 150 30 13 12-50 1-6 PET20030 200 30 13 12-50 1-6 PET30030 300 30 13 12-50 1-6 PET40050 400 50 13 12-50 1-6 PET50050 500 50 13 12-50 1-6 PET60050 600 50 13 12-50 1-6 PET80050 800 50 13 12-50 1-6 Polyester Biaxial Geogrid   PET3030 30 30 13 12-50 1-6 PET4040 40 40 13 12-50 1-6 PET5050 50 50 13 12-50 1-6 PET6060 60 60 13 12-50 1-6 PET8080 80 80 13 12-50 1-6 PET9090 90 90 13 12-50 1-6 PET100100 100 100 13 12-50 1-6 PET110110 110 110 13 12-50 1-6 PET120120 120 120 13 12-50 1-6 PET150150 150 150 13 12-50 1-6 PET180180 180 180 13 12-50 1-6 PET200200 200 200 13 12-50 1-6 PET300300 300 300 13 12-50 1-6 PET350350 350 350 13 12-50 1-6 PET400400 400 400 13 12-50 1-6 PET450450 450 450 13 12-50 1-6 PET500500 500 500 13 12-50 1-6 PET600600 600 600 13 12-50 1-6 PET700700 700 700 13 12-50 1-6 PET800800 800 800 13 12-50 1-6 Packages Wound by Cardboard ot PVC tube, then wrapped by PE film or polybag. How to install Polyester Geogrid Step 1:Excavate reinforced soil area.  Remove existing soils in the reinforced soil area to the maximum embedment length of the geogrid design. Provide a generally level soil condition behind the wall units for the placement of each geogrid layer. Step 2: Cut Geogrid.  Cut sections from geogrid roll to the specified length (embedment depth). Geo-grid roll direction is from the wall toward the embankment (check manufacturer's criteria). In most cases correct orientation is to roll the geogrid perpendicular to the wall face. Step 3: Install Geogrid. Hook geogrid over the fiberglass pins to ensure a positive mechanical connection between the unit and geogrid Step 4: Secure Geogrid.  Pull the pinned geogrid taut to eliminate loose folds. Stake or secure back edge of geo-grid before and during backfill and compaction. Remove stakes, if desired, once backfill is placed. Place additional sections of geogrid, abutting each other, for continuous coverage at each layer. Step 5: Install next course of units.  Check for level with each new course. Step 6: Place compacted backfill over geogrid in 8" lifts. Provide a minimum of six inches reinforced fill coverage prior to driving equipment over the geogrid with wheeled or tracked equipment. Avoid driving or turning equipment directly on geogrid to avoid excessive damage.

Polyester Geogrid For Soil Stabilization

Certificate: ISO9001, CE, ITB

Product Description: Polyester Geogrid For Soil Stabilization is a high performance soil reinforcement product. Soil Stabilization Polyester Geogrid is made with polyester yarns that have a high molecular weight and extraordinary tensile strength. These yarns are then knitted into a dimensionally stable network of apertures to form the geometric grid shape which offers tensile reinforcement to the soil in both the vertical and horizontal directions. Polyester Geogrids For Soil Stabilization is coated with a black saturation coating to provide further chemical and mechanical benefits that preserve its durability in any environment. Soil Stabilization Polyester Grid are made as per ISO9002, ASTM, CE and ITB. Certificate: ISO9002, CE, ITB Features and Benefits High tensile force at low elongation High ultimate tensile strength Excellent long-term behaviour due to low creep characteristics High resistance to soil micro-organisms and chemicals, UV radiation and mechanical damage Good grid/soil interaction provided by selecting the geogrid mesh to accommodate the adjacent material Problem-free installation due to low product weight and excellent flexibility even in extreme cold Very wide range of tensile strengths in length and width Applications Load-bearing layers in road, railway and airport construction Access roads and transportation routes Retaining walls and extra-steep earthwork slopes Slope stabilisation Noise reduction barriers Reclamation of industrial wasteland Earth embankments over piles Landfill Bridging of underground voids or sinkholes Technical Data Type Item No. Tensile Strength (kN/m) Elongation Mesh Size Width MD CD (%) (mm*mm) (m) Polyester Uniaxial Geogrid PET5030 30 30 13 12-50 1-6 PET6030 60 30 13 12-50 1-6 PET8030 80 30 13 12-50 1-6 PET10030 100 30 13 12-50 1-6 PET11030 110 30 13 12-50 1-6 PET120/30 120 30 13 12-50 1-6 PET15030 150 30 13 12-50 1-6 PET20030 200 30 13 12-50 1-6 PET30030 300 30 13 12-50 1-6 PET40050 400 50 13 12-50 1-6 PET50050 500 50 13 12-50 1-6 PET60050 600 50 13 12-50 1-6 PET80050 800 50 13 12-50 1-6 Polyester Biaxial Geogrid   PET3030 30 30 13 12-50 1-6 PET4040 40 40 13 12-50 1-6 PET5050 50 50 13 12-50 1-6 PET6060 60 60 13 12-50 1-6 PET8080 80 80 13 12-50 1-6 PET9090 90 90 13 12-50 1-6 PET100100 100 100 13 12-50 1-6 PET110110 110 110 13 12-50 1-6 PET120120 120 120 13 12-50 1-6 PET150150 150 150 13 12-50 1-6 PET180180 180 180 13 12-50 1-6 PET200200 200 200 13 12-50 1-6 PET300300 300 300 13 12-50 1-6 PET350350 350 350 13 12-50 1-6 PET400400 400 400 13 12-50 1-6 PET450450 450 450 13 12-50 1-6 PET500500 500 500 13 12-50 1-6 PET600600 600 600 13 12-50 1-6 PET700700 700 700 13 12-50 1-6 PET800800 800 800 13 12-50 1-6 Packages Wound by Cardboard ot PVC tube, then wrapped by PE film or polybag. How to install Polyester Geogrid Step 1:Excavate reinforced soil area.  Remove existing soils in the reinforced soil area to the maximum embedment length of the geogrid design. Provide a generally level soil condition behind the wall units for the placement of each geogrid layer. Step 2: Cut Geogrid.  Cut sections from geogrid roll to the specified length (embedment depth). Geo-grid roll direction is from the wall toward the embankment (check manufacturer's criteria). In most cases correct orientation is to roll the geogrid perpendicular to the wall face. Step 3: Install Geogrid. Hook geogrid over the fiberglass pins to ensure a positive mechanical connection between the unit and geogrid Step 4: Secure Geogrid.  Pull the pinned geogrid taut to eliminate loose folds. Stake or secure back edge of geo-grid before and during backfill and compaction. Remove stakes, if desired, once backfill is placed. Place additional sections of geogrid, abutting each other, for continuous coverage at each layer. Step 5: Install next course of units.  Check for level with each new course. Step 6: Place compacted backfill over geogrid in 8" lifts. Provide a minimum of six inches reinforced fill coverage prior to driving equipment over the geogrid with wheeled or tracked equipment. Avoid driving or turning equipment directly on geogrid to avoid excessive damage.

Uniaxial PVC Coated Polyester Geogrid

Certificate: ISO9001, CE, ITB

Product Description: Uniaxial PVC Coated Polyester Geogrid is knitted and polymeric coated polyester uniaxial Geogrid strips, which are manufactured from select grades of high tenacity polyester yarns with molecular weight > 25,000 and carboxyl end groups < 30, to ensure high strengths, low creep and excellent durability. The yarns are formed into a dimensionally stable grid structure with uniform apertures using an advanced weft insertion warp knitting process, which is then given a tough and durable PVC coating to enhance dimensional stability, resistance to installation damage and durability. Uniaxial Polyester Geogrid are mainly used to reinforce retaining walls and steep slopes. Certificate: ISO9002, CE, ITB Features and Benefits High tensile force at low elongation High ultimate tensile strength Excellent long-term behaviour due to low creep characteristics High resistance to soil micro-organisms and chemicals, UV radiation and mechanical damage Good grid/soil interaction provided by selecting the geogrid mesh to accommodate the adjacent material Problem-free installation due to low product weight and excellent flexibility even in extreme cold Very wide range of tensile strengths in length and width Applications Load-bearing layers in road, railway and airport construction Access roads and transportation routes Retaining walls and extra-steep earthwork slopes Slope stabilisation Noise reduction barriers Reclamation of industrial wasteland Earth embankments over piles Landfill Bridging of underground voids or sinkholes Technical Data Type Item No. Tensile Strength (kN/m) Elongation Mesh Size Width MD CD (%) (mm*mm) (m) Polyester Uniaxial Geogrid PET5030 30 30 13 12-50 1-6 PET6030 60 30 13 12-50 1-6 PET8030 80 30 13 12-50 1-6 PET10030 100 30 13 12-50 1-6 PET11030 110 30 13 12-50 1-6 PET120/30 120 30 13 12-50 1-6 PET15030 150 30 13 12-50 1-6 PET20030 200 30 13 12-50 1-6 PET30030 300 30 13 12-50 1-6 PET40050 400 50 13 12-50 1-6 PET50050 500 50 13 12-50 1-6 PET60050 600 50 13 12-50 1-6 PET80050 800 50 13 12-50 1-6 Polyester Biaxial Geogrid   PET3030 30 30 13 12-50 1-6 PET4040 40 40 13 12-50 1-6 PET5050 50 50 13 12-50 1-6 PET6060 60 60 13 12-50 1-6 PET8080 80 80 13 12-50 1-6 PET9090 90 90 13 12-50 1-6 PET100100 100 100 13 12-50 1-6 PET110110 110 110 13 12-50 1-6 PET120120 120 120 13 12-50 1-6 PET150150 150 150 13 12-50 1-6 PET180180 180 180 13 12-50 1-6 PET200200 200 200 13 12-50 1-6 PET300300 300 300 13 12-50 1-6 PET350350 350 350 13 12-50 1-6 PET400400 400 400 13 12-50 1-6 PET450450 450 450 13 12-50 1-6 PET500500 500 500 13 12-50 1-6 PET600600 600 600 13 12-50 1-6 PET700700 700 700 13 12-50 1-6 PET800800 800 800 13 12-50 1-6 Packages Wound by Cardboard ot PVC tube, then wrapped by PE film or polybag. How to install Polyester Geogrid Step 1:Excavate reinforced soil area.  Remove existing soils in the reinforced soil area to the maximum embedment length of the geogrid design. Provide a generally level soil condition behind the wall units for the placement of each geogrid layer. Step 2: Cut Geogrid.  Cut sections from geogrid roll to the specified length (embedment depth). Geo-grid roll direction is from the wall toward the embankment (check manufacturer's criteria). In most cases correct orientation is to roll the geogrid perpendicular to the wall face. Step 3: Install Geogrid. Hook geogrid over the fiberglass pins to ensure a positive mechanical connection between the unit and geogrid Step 4: Secure Geogrid.  Pull the pinned geogrid taut to eliminate loose folds. Stake or secure back edge of geo-grid before and during backfill and compaction. Remove stakes, if desired, once backfill is placed. Place additional sections of geogrid, abutting each other, for continuous coverage at each layer. Step 5: Install next course of units.  Check for level with each new course. Step 6: Place compacted backfill over geogrid in 8" lifts. Provide a minimum of six inches reinforced fill coverage prior to driving equipment over the geogrid with wheeled or tracked equipment. Avoid driving or turning equipment directly on geogrid to avoid excessive damage.

Reinforcement Geogrid For Retaining Walls

Certificate: ISO9001, CE, ITB

Product Description: Reinforcement Geogrid For Retaining Walls is composed of high molecular weight polyester, high tenacity multifilament yarns that are woven into a stable network placed in tension. The high strength polyester yarns are coated with a PVC material. Geogrid For Retaining Walls are inert to biological degradation and are resistant to naturally encountered chemicals, alkalis and acids. Geogrid For Reinforcement Retaining Walls are typically used for soil reinforcement applications such as retaining walls, steepened slopes, embankments, sub-grad stabilization, embankments over soft soils and waste containment applications. Certificate: ISO9002, CE, ITB Features and Benefits High tensile force at low elongation High ultimate tensile strength Excellent long-term behaviour due to low creep characteristics High resistance to soil micro-organisms and chemicals, UV radiation and mechanical damage Good grid/soil interaction provided by selecting the geogrid mesh to accommodate the adjacent material Problem-free installation due to low product weight and excellent flexibility even in extreme cold Very wide range of tensile strengths in length and width Applications Load-bearing layers in road, railway and airport construction Access roads and transportation routes Retaining walls and extra-steep earthwork slopes Slope stabilisation Noise reduction barriers Reclamation of industrial wasteland Earth embankments over piles Landfill Bridging of underground voids or sinkholes Technical Data Type Item No. Tensile Strength (kN/m) Elongation Mesh Size Width MD CD (%) (mm*mm) (m) Polyester Uniaxial Geogrid PET5030 30 30 13 12-50 1-6 PET6030 60 30 13 12-50 1-6 PET8030 80 30 13 12-50 1-6 PET10030 100 30 13 12-50 1-6 PET11030 110 30 13 12-50 1-6 PET120/30 120 30 13 12-50 1-6 PET15030 150 30 13 12-50 1-6 PET20030 200 30 13 12-50 1-6 PET30030 300 30 13 12-50 1-6 PET40050 400 50 13 12-50 1-6 PET50050 500 50 13 12-50 1-6 PET60050 600 50 13 12-50 1-6 PET80050 800 50 13 12-50 1-6 Polyester Biaxial Geogrid   PET3030 30 30 13 12-50 1-6 PET4040 40 40 13 12-50 1-6 PET5050 50 50 13 12-50 1-6 PET6060 60 60 13 12-50 1-6 PET8080 80 80 13 12-50 1-6 PET9090 90 90 13 12-50 1-6 PET100100 100 100 13 12-50 1-6 PET110110 110 110 13 12-50 1-6 PET120120 120 120 13 12-50 1-6 PET150150 150 150 13 12-50 1-6 PET180180 180 180 13 12-50 1-6 PET200200 200 200 13 12-50 1-6 PET300300 300 300 13 12-50 1-6 PET350350 350 350 13 12-50 1-6 PET400400 400 400 13 12-50 1-6 PET450450 450 450 13 12-50 1-6 PET500500 500 500 13 12-50 1-6 PET600600 600 600 13 12-50 1-6 PET700700 700 700 13 12-50 1-6 PET800800 800 800 13 12-50 1-6 Packages Wound by Cardboard ot PVC tube, then wrapped by PE film or polybag. How to install Polyester Geogrid Step 1:Excavate reinforced soil area.  Remove existing soils in the reinforced soil area to the maximum embedment length of the geogrid design. Provide a generally level soil condition behind the wall units for the placement of each geogrid layer. Step 2: Cut Geogrid.  Cut sections from geogrid roll to the specified length (embedment depth). Geo-grid roll direction is from the wall toward the embankment (check manufacturer's criteria). In most cases correct orientation is to roll the geogrid perpendicular to the wall face. Step 3: Install Geogrid. Hook geogrid over the fiberglass pins to ensure a positive mechanical connection between the unit and geogrid Step 4: Secure Geogrid.  Pull the pinned geogrid taut to eliminate loose folds. Stake or secure back edge of geo-grid before and during backfill and compaction. Remove stakes, if desired, once backfill is placed. Place additional sections of geogrid, abutting each other, for continuous coverage at each layer. Step 5: Install next course of units.  Check for level with each new course. Step 6: Place compacted backfill over geogrid in 8" lifts. Provide a minimum of six inches reinforced fill coverage prior to driving equipment over the geogrid with wheeled or tracked equipment. Avoid driving or turning equipment directly on geogrid to avoid excessive damage.

Unaxial PET geogrid Retaining Walls & Slope Reinforcement

Certificate: ISO9001, CE, ITB

Product Description: Unaxial PET geogrid Retaining Walls & Slope Reinforcement is warp knitted by high tenacity multi-filament polyester yarns with various mesh sizes and tensile strength from 20 to 1000kN/m. Exterior of Unaxial PET Geogrid coated with PVC or modified polymer mixture for UV, acid and alkali resistance prevents the bio-decomposition. Unaxial PET Geogrid For Retaining Walls are a precision grid that offers superior junction strength and high coefficient of soil interaction. Uniaxial PET Geogrid for Slope Reinforcement is a perfect choice for steep slope stabilization. Certificate: ISO9002, CE, ITB Features and Benefits High tensile force at low elongation High ultimate tensile strength Excellent long-term behaviour due to low creep characteristics High resistance to soil micro-organisms and chemicals, UV radiation and mechanical damage Good grid/soil interaction provided by selecting the geogrid mesh to accommodate the adjacent material Problem-free installation due to low product weight and excellent flexibility even in extreme cold Very wide range of tensile strengths in length and width Applications Load-bearing layers in road, railway and airport construction Access roads and transportation routes Retaining walls and extra-steep earthwork slopes Slope stabilisation Noise reduction barriers Reclamation of industrial wasteland Earth embankments over piles Landfill Bridging of underground voids or sinkholes Technical Data Type Item No. Tensile Strength (kN/m) Elongation Mesh Size Width MD CD (%) (mm*mm) (m) Polyester Uniaxial Geogrid PET5030 30 30 13 12-50 1-6 PET6030 60 30 13 12-50 1-6 PET8030 80 30 13 12-50 1-6 PET10030 100 30 13 12-50 1-6 PET11030 110 30 13 12-50 1-6 PET120/30 120 30 13 12-50 1-6 PET15030 150 30 13 12-50 1-6 PET20030 200 30 13 12-50 1-6 PET30030 300 30 13 12-50 1-6 PET40050 400 50 13 12-50 1-6 PET50050 500 50 13 12-50 1-6 PET60050 600 50 13 12-50 1-6 PET80050 800 50 13 12-50 1-6 Polyester Biaxial Geogrid   PET3030 30 30 13 12-50 1-6 PET4040 40 40 13 12-50 1-6 PET5050 50 50 13 12-50 1-6 PET6060 60 60 13 12-50 1-6 PET8080 80 80 13 12-50 1-6 PET9090 90 90 13 12-50 1-6 PET100100 100 100 13 12-50 1-6 PET110110 110 110 13 12-50 1-6 PET120120 120 120 13 12-50 1-6 PET150150 150 150 13 12-50 1-6 PET180180 180 180 13 12-50 1-6 PET200200 200 200 13 12-50 1-6 PET300300 300 300 13 12-50 1-6 PET350350 350 350 13 12-50 1-6 PET400400 400 400 13 12-50 1-6 PET450450 450 450 13 12-50 1-6 PET500500 500 500 13 12-50 1-6 PET600600 600 600 13 12-50 1-6 PET700700 700 700 13 12-50 1-6 PET800800 800 800 13 12-50 1-6 Packages Wound by Cardboard ot PVC tube, then wrapped by PE film or polybag. How to install Polyester Geogrid Step 1:Excavate reinforced soil area.  Remove existing soils in the reinforced soil area to the maximum embedment length of the geogrid design. Provide a generally level soil condition behind the wall units for the placement of each geogrid layer. Step 2: Cut Geogrid.  Cut sections from geogrid roll to the specified length (embedment depth). Geo-grid roll direction is from the wall toward the embankment (check manufacturer's criteria). In most cases correct orientation is to roll the geogrid perpendicular to the wall face. Step 3: Install Geogrid. Hook geogrid over the fiberglass pins to ensure a positive mechanical connection between the unit and geogrid Step 4: Secure Geogrid.  Pull the pinned geogrid taut to eliminate loose folds. Stake or secure back edge of geo-grid before and during backfill and compaction. Remove stakes, if desired, once backfill is placed. Place additional sections of geogrid, abutting each other, for continuous coverage at each layer. Step 5: Install next course of units.  Check for level with each new course. Step 6: Place compacted backfill over geogrid in 8" lifts. Provide a minimum of six inches reinforced fill coverage prior to driving equipment over the geogrid with wheeled or tracked equipment. Avoid driving or turning equipment directly on geogrid to avoid excessive damage.

PVC Coated Polyester Biaxial Geogrid

Certificate: ISO9001, CE, ITB

Product Description: PVC Coated Polyester Biaxial Geogrid is manufactured from high modulus polyester yarns to ensure the long term structural stability of reinforced soil structures. PVC Coated Polyester Geogrid can accomodate extremely high loads due to low-creep, high-modulus raw materials. The product's relatively low reduction factors have been verified and certified by independent research institutes and testing laboratories. Polyester Biaxial Geogrid is used for reinforcement of soil embankments, soil slopes, landfill veneers, bridge abutments and retaining walls. Certificate: ISO9002, CE, ITB Features and Benefits High tensile force at low elongation High ultimate tensile strength Excellent long-term behaviour due to low creep characteristics High resistance to soil micro-organisms and chemicals, UV radiation and mechanical damage Good grid/soil interaction provided by selecting the geogrid mesh to accommodate the adjacent material Problem-free installation due to low product weight and excellent flexibility even in extreme cold Very wide range of tensile strengths in length and width Applications Load-bearing layers in road, railway and airport construction Access roads and transportation routes Retaining walls and extra-steep earthwork slopes Slope stabilisation Noise reduction barriers Reclamation of industrial wasteland Earth embankments over piles Landfill Bridging of underground voids or sinkholes Technical Data Type Item No. Tensile Strength (kN/m) Elongation Mesh Size Width MD CD (%) (mm*mm) (m) Polyester Uniaxial Geogrid PET5030 30 30 13 12-50 1-6 PET6030 60 30 13 12-50 1-6 PET8030 80 30 13 12-50 1-6 PET10030 100 30 13 12-50 1-6 PET11030 110 30 13 12-50 1-6 PET120/30 120 30 13 12-50 1-6 PET15030 150 30 13 12-50 1-6 PET20030 200 30 13 12-50 1-6 PET30030 300 30 13 12-50 1-6 PET40050 400 50 13 12-50 1-6 PET50050 500 50 13 12-50 1-6 PET60050 600 50 13 12-50 1-6 PET80050 800 50 13 12-50 1-6 Polyester Biaxial Geogrid   PET3030 30 30 13 12-50 1-6 PET4040 40 40 13 12-50 1-6 PET5050 50 50 13 12-50 1-6 PET6060 60 60 13 12-50 1-6 PET8080 80 80 13 12-50 1-6 PET9090 90 90 13 12-50 1-6 PET100100 100 100 13 12-50 1-6 PET110110 110 110 13 12-50 1-6 PET120120 120 120 13 12-50 1-6 PET150150 150 150 13 12-50 1-6 PET180180 180 180 13 12-50 1-6 PET200200 200 200 13 12-50 1-6 PET300300 300 300 13 12-50 1-6 PET350350 350 350 13 12-50 1-6 PET400400 400 400 13 12-50 1-6 PET450450 450 450 13 12-50 1-6 PET500500 500 500 13 12-50 1-6 PET600600 600 600 13 12-50 1-6 PET700700 700 700 13 12-50 1-6 PET800800 800 800 13 12-50 1-6 Packages Wound by Cardboard ot PVC tube, then wrapped by PE film or polybag. How to install Polyester Geogrid Step 1:Excavate reinforced soil area.  Remove existing soils in the reinforced soil area to the maximum embedment length of the geogrid design. Provide a generally level soil condition behind the wall units for the placement of each geogrid layer. Step 2: Cut Geogrid.  Cut sections from geogrid roll to the specified length (embedment depth). Geo-grid roll direction is from the wall toward the embankment (check manufacturer's criteria). In most cases correct orientation is to roll the geogrid perpendicular to the wall face. Step 3: Install Geogrid. Hook geogrid over the fiberglass pins to ensure a positive mechanical connection between the unit and geogrid Step 4: Secure Geogrid.  Pull the pinned geogrid taut to eliminate loose folds. Stake or secure back edge of geo-grid before and during backfill and compaction. Remove stakes, if desired, once backfill is placed. Place additional sections of geogrid, abutting each other, for continuous coverage at each layer. Step 5: Install next course of units.  Check for level with each new course. Step 6: Place compacted backfill over geogrid in 8" lifts. Provide a minimum of six inches reinforced fill coverage prior to driving equipment over the geogrid with wheeled or tracked equipment. Avoid driving or turning equipment directly on geogrid to avoid excessive damage.

Pavement Reinforcement Fiberglass Geogrid

Certificate: ISO9001,CE, ITB, TBU, UKAS, ASTM

Product Description: Pavement Reinforcement Fiberglass Geogrid is a high strength self-adhesive reinforcement grid designed to control reflective cracking in asphalt concrete overlays on roads, highways, bridges and car parks. Pavement Reinforcement Grids reduce both thermal and stress-related cracking. Its self-adhesive application allows for quick installation and the fibreglass components account for its exceptional performance. Pavement Reinforcement Geogrid helps retard cracking from reflecting through a new asphalt overlay to the surface. Pavement Reinforcement Fibreglass Geogrid is "sandwiched" between the levelling and surface courses of asphalt, and is designed to turn crack stresses horizontally and dissipate the stress. Certificates: ISO9001, CE, ITB Features and Benefits: • Lowers maintenance costs • Repairs severely cracked roads and postpones complete reconstruction • Dramatically extends the life of roads, runways and parking lots • Open aperture design promotes aggregate interlock between paving courses, greatly decreasing shear potential that is common with paving fabrics • High stiffness, high modulus of elasticity, low elongation • Effective bonding of grid during installation to leveling course with patented adhesive backing (standard practice of use of tack coat is recommended to enhance or promote bonding between lifts of ACC layers) • Ease of constructability allows for Fibgrid installation and immediate placement of overlying pavement • Suitable for all types of asphalt mixes. • Minimizes both thermal and stress related reflective cracking. • Reduces pavement rutting under high ambient temperatures and intense wheel loads. • Increases the fatigue life of pavements with weak foundations. • Extends pavement life. • Provides cost benefits by increasing pavement life cycle. • Fast, easy installation and recyclable. • Reduces overlay thickness to a minimum of 50 mm. Applications: 1. Airport runways, taxiways, roads, bridges, parking lots, jointed concrete highways to control reflective cracking. 2. High traffic pavement to control of rutting. 3. New highway construction, and other road maintenance/repair jobs to improve pavement life. Technical Date: Fiberglass Geogrid Technical Data Specification Tensile Strength (kN/m) Elongation Mesh size (mm x mm) Width (m) Roll Length (m) Elastic Modulus (Gpa) Temperature Resistance Warp Weft Warp Weft FG2525 ≥ 25 ≥ 25 ≤ 3 ≤ 3 12.7x12.7 25.4x25.4 30x30 40x40 50x50 1 1.5 2 2.5 3 4 4.5 5 6 50 100 150 200 300 400 500 600 76 -100°C-280°C FG3030 ≥ 30 ≥ 30 ≤ 3 ≤ 3 FG4040 ≥ 40 ≥ 40 ≤ 3 ≤ 3 FG5050 ≥ 50 ≥ 50 ≤ 3 ≤ 3 FG6060 ≥ 60 ≥ 60 ≤ 3 ≤ 3 FG8080 ≥ 80 ≥ 80 ≤ 3 ≤ 3 FG9090 ≥ 80 ≥ 80 ≤ 3 ≤ 3 FG100100 ≥ 100 ≥ 100 ≤ 3 ≤ 3 FG120120 ≥ 120 ≥ 120 ≤ 3 ≤ 3 FG150150 ≥ 150 ≥ 150 ≤ 3 ≤ 3 FG180180 ≥ 180 ≥ 180 ≤ 3 ≤ 3 FG200200 ≥ 200 ≥ 200 ≤ 3 ≤ 3 FG300300 ≥ 300 ≥ 300 ≤ 3 ≤ 3 FG400400 ≥ 400 ≥ 400 ≤ 3 ≤ 3 Physical and Chemical Stability Good Pressure Sensative Glue Available Coating Material Modified Asphalt Polymer, Acrylic Acid Polymer, SBR or PVC Resin Content (%) More than 20% Composited or Sewed with Non-Woven Fabric or Geotextile 25g, 30g, 40g or 50g/m2 PP no-woven fabric with one side or two side by pressure sensative glue or warp knitted 100g/m2, 120g/m2 or 140g/m2 Polyester continous filament needle punched geotextile by warp knitted Packages: 1. Each roll per PE or Polybag or woven bag, then in container. Colourful label can be available upon request. 2. Each roll per PE or Polybag or woven bag, then on pallet 3. Custom package can be available. How to install Fiberglass Geogrid 1. Prepare the Surface • Complete all crack sealing, pothole filling, base repairs, leveling course applications, etc. • Surface must be dry, clean and dust-free. • The road surface temperature must be between 5°C* (40°F**) and 60°C (140°F). On asphalt surfaces less than 24 hours old, the surface temperature must be between 5°C (40°F) and 46°C (110°F). Local guidelines should be followed for paving temperature range. 2. Install Fibtex Fiberglass Geogrid • Load roll onto front of tractor. Always load the red colored end of the core on the right side of the installation vehicle to allow placement of the mesh with the self-adhesive side down. • Roll only with rubber-tired roller to activate adhesive. Roller must be kept clean. • Apply tack coat per project requirements and pave once fully cured. NOTE: Fibgrid can also be installed manually. 3. Pave • The surface course of asphalt can be placed immediately after Fibgrid is installed. There are no disruptions or delays to normal paving operations. • Minimum 75-150 mm (3-6") overlap is required at end of roll joints. Minimum 25-50 mm (1-2") overlap is required for longitudinal joints.

Road Reinforcement Fiberglass Geogrids

Certificate: ISO9001,CE, ITB, TBU, UKAS, ASTM

Product Description: Road Reinforcement Fiberglass Geogrids has long term structural stability. It is suitable for permanent projects. Road Reinforcement Geogrid is extensively used in asphalt pavement, soil stabilization and embankment reinforcement. Road Reinforcement Grids can effectively prevent the ground from cracking and subsiding. Applying Road Reinforcement Fiber Glass Geogrid can reduce the overlay thickness of asphalt, thereby, fiberglass geogrid can greatly reduce the construction cost and project investment. Certificates: ISO9001, CE, ITB Features and Benefits: • Lowers maintenance costs • Repairs severely cracked roads and postpones complete reconstruction • Dramatically extends the life of roads, runways and parking lots • Open aperture design promotes aggregate interlock between paving courses, greatly decreasing shear potential that is common with paving fabrics • High stiffness, high modulus of elasticity, low elongation • Effective bonding of grid during installation to leveling course with patented adhesive backing (standard practice of use of tack coat is recommended to enhance or promote bonding between lifts of ACC layers) • Ease of constructability allows for Fibgrid installation and immediate placement of overlying pavement • Suitable for all types of asphalt mixes. • Minimizes both thermal and stress related reflective cracking. • Reduces pavement rutting under high ambient temperatures and intense wheel loads. • Increases the fatigue life of pavements with weak foundations. • Extends pavement life. • Provides cost benefits by increasing pavement life cycle. • Fast, easy installation and recyclable. • Reduces overlay thickness to a minimum of 50 mm. Applications: 1. Airport runways, taxiways, roads, bridges, parking lots, jointed concrete highways to control reflective cracking. 2. High traffic pavement to control of rutting. 3. New highway construction, and other road maintenance/repair jobs to improve pavement life. Technical Date: Fiberglass Geogrid Technical Data Specification Tensile Strength (kN/m) Elongation Mesh size (mm x mm) Width (m) Roll Length (m) Elastic Modulus (Gpa) Temperature Resistance Warp Weft Warp Weft FG2525 ≥ 25 ≥ 25 ≤ 3 ≤ 3 12.7x12.7 25.4x25.4 30x30 40x40 50x50 1 1.5 2 2.5 3 4 4.5 5 6 50 100 150 200 300 400 500 600 76 -100°C-280°C FG3030 ≥ 30 ≥ 30 ≤ 3 ≤ 3 FG4040 ≥ 40 ≥ 40 ≤ 3 ≤ 3 FG5050 ≥ 50 ≥ 50 ≤ 3 ≤ 3 FG6060 ≥ 60 ≥ 60 ≤ 3 ≤ 3 FG8080 ≥ 80 ≥ 80 ≤ 3 ≤ 3 FG9090 ≥ 80 ≥ 80 ≤ 3 ≤ 3 FG100100 ≥ 100 ≥ 100 ≤ 3 ≤ 3 FG120120 ≥ 120 ≥ 120 ≤ 3 ≤ 3 FG150150 ≥ 150 ≥ 150 ≤ 3 ≤ 3 FG180180 ≥ 180 ≥ 180 ≤ 3 ≤ 3 FG200200 ≥ 200 ≥ 200 ≤ 3 ≤ 3 FG300300 ≥ 300 ≥ 300 ≤ 3 ≤ 3 FG400400 ≥ 400 ≥ 400 ≤ 3 ≤ 3 Physical and Chemical Stability Good Pressure Sensative Glue Available Coating Material Modified Asphalt Polymer, Acrylic Acid Polymer, SBR or PVC Resin Content (%) More than 20% Composited or Sewed with Non-Woven Fabric or Geotextile 25g, 30g, 40g or 50g/m2 PP no-woven fabric with one side or two side by pressure sensative glue or warp knitted 100g/m2, 120g/m2 or 140g/m2 Polyester continous filament needle punched geotextile by warp knitted Packages: 1. Each roll per PE or Polybag or woven bag, then in container. Colourful label can be available upon request. 2. Each roll per PE or Polybag or woven bag, then on pallet 3. Custom package can be available. How to install Fiberglass Geogrid 1. Prepare the Surface • Complete all crack sealing, pothole filling, base repairs, leveling course applications, etc. • Surface must be dry, clean and dust-free. • The road surface temperature must be between 5°C* (40°F**) and 60°C (140°F). On asphalt surfaces less than 24 hours old, the surface temperature must be between 5°C (40°F) and 46°C (110°F). Local guidelines should be followed for paving temperature range. 2. Install Fibtex Fiberglass Geogrid • Load roll onto front of tractor. Always load the red colored end of the core on the right side of the installation vehicle to allow placement of the mesh with the self-adhesive side down. • Roll only with rubber-tired roller to activate adhesive. Roller must be kept clean. • Apply tack coat per project requirements and pave once fully cured. NOTE: Fibgrid can also be installed manually. 3. Pave • The surface course of asphalt can be placed immediately after Fibgrid is installed. There are no disruptions or delays to normal paving operations. • Minimum 75-150 mm (3-6") overlap is required at end of roll joints. Minimum 25-50 mm (1-2") overlap is required for longitudinal joints.

Asphalt Pavement Geogrid Mesh

Certificate: ISO9001,CE, ITB, TBU, UKAS, ASTM

Product Description: Asphalt Pavement Geogrid Mesh is a new type of geosynthetic material. Asphalt Pavement Geogrids are made from fiberglass roving and then coated with modified asphalt polymer or SBR. Asphalt Pavement Mesh has strong tensile and it can largely increase the bearing capacity of the ground and prolongs the service life of the road. This material has high tensile strength and good wear resistant performance. Asphalt Pavement Geogrid Fabric is suitable for the reinforcement of soft soil, cement, concrete, asphalt and so on. Compared with plastic steel geogrid, fiberglass geogrid has better heat resistance. This material is characterized by excellent thermal stability. It performs well under high temperature. Certificates: ISO9001, CE, ITB Features and Benefits: • Lowers maintenance costs • Repairs severely cracked roads and postpones complete reconstruction • Dramatically extends the life of roads, runways and parking lots • Open aperture design promotes aggregate interlock between paving courses, greatly decreasing shear potential that is common with paving fabrics • High stiffness, high modulus of elasticity, low elongation • Effective bonding of grid during installation to leveling course with patented adhesive backing (standard practice of use of tack coat is recommended to enhance or promote bonding between lifts of ACC layers) • Ease of constructability allows for Fibgrid installation and immediate placement of overlying pavement • Suitable for all types of asphalt mixes. • Minimizes both thermal and stress related reflective cracking. • Reduces pavement rutting under high ambient temperatures and intense wheel loads. • Increases the fatigue life of pavements with weak foundations. • Extends pavement life. • Provides cost benefits by increasing pavement life cycle. • Fast, easy installation and recyclable. • Reduces overlay thickness to a minimum of 50 mm. Applications: 1. Airport runways, taxiways, roads, bridges, parking lots, jointed concrete highways to control reflective cracking. 2. High traffic pavement to control of rutting. 3. New highway construction, and other road maintenance/repair jobs to improve pavement life. Technical Date: Fiberglass Geogrid Technical Data Specification Tensile Strength (kN/m) Elongation Mesh size (mm x mm) Width (m) Roll Length (m) Elastic Modulus (Gpa) Temperature Resistance Warp Weft Warp Weft FG2525 ≥ 25 ≥ 25 ≤ 3 ≤ 3 12.7x12.7 25.4x25.4 30x30 40x40 50x50 1 1.5 2 2.5 3 4 4.5 5 6 50 100 150 200 300 400 500 600 76 -100°C-280°C FG3030 ≥ 30 ≥ 30 ≤ 3 ≤ 3 FG4040 ≥ 40 ≥ 40 ≤ 3 ≤ 3 FG5050 ≥ 50 ≥ 50 ≤ 3 ≤ 3 FG6060 ≥ 60 ≥ 60 ≤ 3 ≤ 3 FG8080 ≥ 80 ≥ 80 ≤ 3 ≤ 3 FG9090 ≥ 80 ≥ 80 ≤ 3 ≤ 3 FG100100 ≥ 100 ≥ 100 ≤ 3 ≤ 3 FG120120 ≥ 120 ≥ 120 ≤ 3 ≤ 3 FG150150 ≥ 150 ≥ 150 ≤ 3 ≤ 3 FG180180 ≥ 180 ≥ 180 ≤ 3 ≤ 3 FG200200 ≥ 200 ≥ 200 ≤ 3 ≤ 3 FG300300 ≥ 300 ≥ 300 ≤ 3 ≤ 3 FG400400 ≥ 400 ≥ 400 ≤ 3 ≤ 3 Physical and Chemical Stability Good Pressure Sensative Glue Available Coating Material Modified Asphalt Polymer, Acrylic Acid Polymer, SBR or PVC Resin Content (%) More than 20% Composited or Sewed with Non-Woven Fabric or Geotextile 25g, 30g, 40g or 50g/m2 PP no-woven fabric with one side or two side by pressure sensative glue or warp knitted 100g/m2, 120g/m2 or 140g/m2 Polyester continous filament needle punched geotextile by warp knitted Packages: 1. Each roll per PE or Polybag or woven bag, then in container. Colourful label can be available upon request. 2. Each roll per PE or Polybag or woven bag, then on pallet 3. Custom package can be available. How to install Fiberglass Geogrid 1. Prepare the Surface • Complete all crack sealing, pothole filling, base repairs, leveling course applications, etc. • Surface must be dry, clean and dust-free. • The road surface temperature must be between 5°C* (40°F**) and 60°C (140°F). On asphalt surfaces less than 24 hours old, the surface temperature must be between 5°C (40°F) and 46°C (110°F). Local guidelines should be followed for paving temperature range. 2. Install Fibtex Fiberglass Geogrid • Load roll onto front of tractor. Always load the red colored end of the core on the right side of the installation vehicle to allow placement of the mesh with the self-adhesive side down. • Roll only with rubber-tired roller to activate adhesive. Roller must be kept clean. • Apply tack coat per project requirements and pave once fully cured. NOTE: Fibgrid can also be installed manually. 3. Pave • The surface course of asphalt can be placed immediately after Fibgrid is installed. There are no disruptions or delays to normal paving operations. • Minimum 75-150 mm (3-6") overlap is required at end of roll joints. Minimum 25-50 mm (1-2") overlap is required for longitudinal joints.

Asphalt Reinforcement Fiberglass Geogrid

Certificate: ISO9001,CE, ITB, TBU, UKAS, ASTM

Product Description: Designed specifically as an interlayer for asphalt reinforcement,  Asphalt Reinforcement Fiberglass Geogrid work to enhance pavement life and performance while helping to reduce maintenance costs.  These include Asphalt Reinforcement Geogrid, Self-adhesive fiberglass geogrid and fiberglass geogrid bonded with PP non woven or geotextile.  While they have distinct characteristics and offer different benefits they all  feature a unique coating that provides excellent heat resistance and stability to a melting point of 900 °F as well as very low shrinkage and ultimate elongation to create a rigid asphalt layer. Fiberglass Geogrid For Asphalt Reinforcement are highl durable, biologically unaffected by soil micro-organisms, inert to all chemicals normally found in the soil, and formulated to resist ultraviolet degradation. Certificates: ISO9001, CE, ITB Features and Benefits: • Lowers maintenance costs • Repairs severely cracked roads and postpones complete reconstruction • Dramatically extends the life of roads, runways and parking lots • Open aperture design promotes aggregate interlock between paving courses, greatly decreasing shear potential that is common with paving fabrics • High stiffness, high modulus of elasticity, low elongation • Effective bonding of grid during installation to leveling course with patented adhesive backing (standard practice of use of tack coat is recommended to enhance or promote bonding between lifts of ACC layers) • Ease of constructability allows for Fibgrid installation and immediate placement of overlying pavement • Suitable for all types of asphalt mixes. • Minimizes both thermal and stress related reflective cracking. • Reduces pavement rutting under high ambient temperatures and intense wheel loads. • Increases the fatigue life of pavements with weak foundations. • Extends pavement life. • Provides cost benefits by increasing pavement life cycle. • Fast, easy installation and recyclable. • Reduces overlay thickness to a minimum of 50 mm. Applications: 1. Airport runways, taxiways, roads, bridges, parking lots, jointed concrete highways to control reflective cracking. 2. High traffic pavement to control of rutting. 3. New highway construction, and other road maintenance/repair jobs to improve pavement life. Technical Date: Fiberglass Geogrid Technical Data Specification Tensile Strength (kN/m) Elongation Mesh size (mm x mm) Width (m) Roll Length (m) Elastic Modulus (Gpa) Temperature Resistance Warp Weft Warp Weft FG2525 ≥ 25 ≥ 25 ≤ 3 ≤ 3 12.7x12.7 25.4x25.4 30x30 40x40 50x50 1 1.5 2 2.5 3 4 4.5 5 6 50 100 150 200 300 400 500 600 76 -100°C-280°C FG3030 ≥ 30 ≥ 30 ≤ 3 ≤ 3 FG4040 ≥ 40 ≥ 40 ≤ 3 ≤ 3 FG5050 ≥ 50 ≥ 50 ≤ 3 ≤ 3 FG6060 ≥ 60 ≥ 60 ≤ 3 ≤ 3 FG8080 ≥ 80 ≥ 80 ≤ 3 ≤ 3 FG9090 ≥ 80 ≥ 80 ≤ 3 ≤ 3 FG100100 ≥ 100 ≥ 100 ≤ 3 ≤ 3 FG120120 ≥ 120 ≥ 120 ≤ 3 ≤ 3 FG150150 ≥ 150 ≥ 150 ≤ 3 ≤ 3 FG180180 ≥ 180 ≥ 180 ≤ 3 ≤ 3 FG200200 ≥ 200 ≥ 200 ≤ 3 ≤ 3 FG300300 ≥ 300 ≥ 300 ≤ 3 ≤ 3 FG400400 ≥ 400 ≥ 400 ≤ 3 ≤ 3 Physical and Chemical Stability Good Pressure Sensative Glue Available Coating Material Modified Asphalt Polymer, Acrylic Acid Polymer, SBR or PVC Resin Content (%) More than 20% Composited or Sewed with Non-Woven Fabric or Geotextile 25g, 30g, 40g or 50g/m2 PP no-woven fabric with one side or two side by pressure sensative glue or warp knitted 100g/m2, 120g/m2 or 140g/m2 Polyester continous filament needle punched geotextile by warp knitted Packages: 1. Each roll per PE or Polybag or woven bag, then in container. Colourful label can be available upon request. 2. Each roll per PE or Polybag or woven bag, then on pallet 3. Custom package can be available. How to install Fiberglass Geogrid 1. Prepare the Surface • Complete all crack sealing, pothole filling, base repairs, leveling course applications, etc. • Surface must be dry, clean and dust-free. • The road surface temperature must be between 5°C* (40°F**) and 60°C (140°F). On asphalt surfaces less than 24 hours old, the surface temperature must be between 5°C (40°F) and 46°C (110°F). Local guidelines should be followed for paving temperature range. 2. Install Fibtex Fiberglass Geogrid • Load roll onto front of tractor. Always load the red colored end of the core on the right side of the installation vehicle to allow placement of the mesh with the self-adhesive side down. • Roll only with rubber-tired roller to activate adhesive. Roller must be kept clean. • Apply tack coat per project requirements and pave once fully cured. NOTE: Fibgrid can also be installed manually. 3. Pave • The surface course of asphalt can be placed immediately after Fibgrid is installed. There are no disruptions or delays to normal paving operations. • Minimum 75-150 mm (3-6") overlap is required at end of roll joints. Minimum 25-50 mm (1-2") overlap is required for longitudinal joints.

Warp Knitted Fiberglass Geogrid For Road Reinforcement

Certificate: ISO9001,CE, ITB, TBU, UKAS, ASTM

Product Description: Warp Knitted Fiberglass Geogrid For Road Reinforcement are composed of fiberglass filaments coated with an inorganic sizing agent. Fiberglass Geogrid For Road Reinforcement possess the properties of high tensile strength in the warp and weft directions, low elongation, excellent temperature range, and good anti-aging and alkali-resistance. Road Reinforcement Fiberglass Geogrid are extensively used for the reinforcement of asphalt pavement, concrete pavement and roadbeds. Compared to traditional materials, the use of Geogrid For Road Reinforcement can reduce construction costs, extend road service life, and prevent deflection cracks. They can also be used to reinforce roadbeds in soft soil for railways, airfields, irrigation channels, and water dams. Certificates: ISO9001, CE, ITB Features and Benefits: • Lowers maintenance costs • Repairs severely cracked roads and postpones complete reconstruction • Dramatically extends the life of roads, runways and parking lots • Open aperture design promotes aggregate interlock between paving courses, greatly decreasing shear potential that is common with paving fabrics • High stiffness, high modulus of elasticity, low elongation • Effective bonding of grid during installation to leveling course with patented adhesive backing (standard practice of use of tack coat is recommended to enhance or promote bonding between lifts of ACC layers) • Ease of constructability allows for GlasGrid installation and immediate placement of overlying pavement • Suitable for all types of asphalt mixes. • Minimizes both thermal and stress related reflective cracking. • Reduces pavement rutting under high ambient temperatures and intense wheel loads. • Increases the fatigue life of pavements with weak foundations. • Extends pavement life. • Provides cost benefits by increasing pavement life cycle. • Fast, easy installation and recyclable. • Reduces overlay thickness to a minimum of 50 mm. Applications: 1. Airport runways, taxiways, roads, bridges, parking lots, jointed concrete highways to control reflective cracking. 2. High traffic pavement to control of rutting. 3. New highway construction, and other road maintenance/repair jobs to improve pavement life. Technical Date: Fiberglass Geogrid Technical Data Specification Tensile Strength (kN/m) Elongation Mesh size (mm x mm) Width (m) Roll Length (m) Elastic Modulus (Gpa) Temperature Resistance Warp Weft Warp Weft FG2525 ≥ 25 ≥ 25 ≤ 3 ≤ 3 12.7x12.7 25.4x25.4 30x30 40x40 50x50 1 1.5 2 2.5 3 4 4.5 5 6 50 100 150 200 300 400 500 600 76 -100°C-280°C FG3030 ≥ 30 ≥ 30 ≤ 3 ≤ 3 FG4040 ≥ 40 ≥ 40 ≤ 3 ≤ 3 FG5050 ≥ 50 ≥ 50 ≤ 3 ≤ 3 FG6060 ≥ 60 ≥ 60 ≤ 3 ≤ 3 FG8080 ≥ 80 ≥ 80 ≤ 3 ≤ 3 FG9090 ≥ 80 ≥ 80 ≤ 3 ≤ 3 FG100100 ≥ 100 ≥ 100 ≤ 3 ≤ 3 FG120120 ≥ 120 ≥ 120 ≤ 3 ≤ 3 FG150150 ≥ 150 ≥ 150 ≤ 3 ≤ 3 FG180180 ≥ 180 ≥ 180 ≤ 3 ≤ 3 FG200200 ≥ 200 ≥ 200 ≤ 3 ≤ 3 FG300300 ≥ 300 ≥ 300 ≤ 3 ≤ 3 FG400400 ≥ 400 ≥ 400 ≤ 3 ≤ 3 Physical and Chemical Stability Good Pressure Sensative Glue Available Coating Material Modified Asphalt Polymer, Acrylic Acid Polymer, SBR or PVC Resin Content (%) More than 20% Composited or Sewed with Non-Woven Fabric or Geotextile 25g, 30g, 40g or 50g/m2 PP no-woven fabric with one side or two side by pressure sensative glue or warp knitted 100g/m2, 120g/m2 or 140g/m2 Polyester continous filament needle punched geotextile by warp knitted Packages: 1. Each roll per PE or Polybag or woven bag, then in container. Colourful label can be available upon request. 2. Each roll per PE or Polybag or woven bag, then on pallet 3. Custom package can be available. How to install Fiberglass Geogrid 1. Prepare the Surface • Complete all crack sealing, pothole filling, base repairs, leveling course applications, etc. • Surface must be dry, clean and dust-free. • The road surface temperature must be between 5°C* (40°F**) and 60°C (140°F). On asphalt surfaces less than 24 hours old, the surface temperature must be between 5°C (40°F) and 46°C (110°F). Local guidelines should be followed for paving temperature range. 2. Install Fibtex Fiberglass Geogrid • Load roll onto front of tractor. Always load the red colored end of the core on the right side of the installation vehicle to allow placement of the mesh with the self-adhesive side down. • Roll only with rubber-tired roller to activate adhesive. Roller must be kept clean. • Apply tack coat per project requirements and pave once fully cured. NOTE: Fibgrid can also be installed manually. 3. Pave • The surface course of asphalt can be placed immediately after Fibgrid is installed. There are no disruptions or delays to normal paving operations. • Minimum 75-150 mm (3-6") overlap is required at end of roll joints. Minimum 25-50 mm (1-2") overlap is required for longitudinal joints.

Silicone baking mat

News

Send Inquiry

Your message must be between 20-3000 characters